
1-1/8in Backset Deadbolt, Flat Faceplate, Without Strike Plate, 628/US28 Aluminum Clear Anodized
Part#: ADRMS1950P-310-628
Hot#: 199937
Available: 16 ( 4 DAL, 4 DEN, 5 KAN, 3 SEA )
Notice: The info below is not item specific.
Adams Rite Manufacturing MS1950P Series
The stainless steel MS1950P Series MS deadlock utilizes a laminated stainless steel bolt, now with enhanced security features, to provide maximum security for a single leaf narrow stile aluminum door. The stainless steel MS1950P-X5X series MS deadlock utilizes a laminated stainless steel hook bolt, now with enhanced security features, to provide maximum security for a sliding narrow stile aluminum door. Both are activated by a pivot mechanism.
Features:
- Cylinder Backset: 31/32" [24.6 mm], 1-1/8" [28.6 mm], or 1-1/2" [38.1 mm] only
- Case: Measures 1" x 6" x depth [25.4 mm x 152.4 mm x depth], depth varies by backset. Fully stainless steel case and internal components. Internal stainless steel plate for enhanced security.
- Bolt: Eight-ply laminated stainless steel. Center ply has alumina-ceramic core to defeat any hacksaw attack, including rod-type “super” hacksaws.
- MS1950P Bolt: Standard straight bolt measures 5/8" x 1-3/8" x 2-7/8" [15.9 mm x 34.9 mm x 73.0 mm] with 1-3/8" [34.9 mm] throw
- MS1950P-X5X Bolt: 5/8" x 1-3/8” [15.9 mm x 349.9 mm] with 13/16” [20.3 mm] throw. Hook shape repels pry bar attempts to “spread” the door from its jamb or lift it off its track.
- Faceplate: Measures 1" x 6-7/8" [25.4 mm x 174.6 mm].
- Strike: Trim plate, box strike, and armored strike are available separately.
- Options: “Schoolhouse” version, also available, is modified so that operation from inside is “unlock only”. This lock is handed and must be specified LH or RH. Specify Series SCH1950, (-X5X). Same faceplate and backset options as Series MS1950P, (-X5X)
Function:
- A 3" laminated stainless steel bolt and complete stainless steel construction makes the heavy duty MS1950P MS® Deadlock a higher security, premium locking solution for swinging doors. The MS1950P is compatible with header and threshold bolts to accommodate multi-point locking in a double door application. The stainless steel hook bolt of the MS1950P-X5X Series MS® Deadlock answers the security need of sliding doors. The hook shaped bolt resists the parting motion of sliding door and jamb.
Operation:
- For ingress, a 360˚ turn of the key or thumbturn on the exterior cylinder retracts the counterbalanced bolt. While the bolt is retracted the door acts as a passage function, until the deadlock is re-locked from either side of the opening. Typically, if the door remains unlocked during business hours, the interior side is equipped with a mortise cylinder and indicator to allow for flexible traffic control by management. An interior thumbturn to lock the bolt and a 4550 lever can also be installed on the interior side to ensure free egress & ADA compliance. Key can be removed only when bolt is in a locked or unlocked state. Lock body accepts a mortise cylinder, thumbturn, 4089 indicator, or 4550 deadlock lever from either side.
How to Order:
- Faceplate:
- 0P: Flat
- 1P: Radius
- 1WP: Radius with weatherstrip
- 2P: Bevel
- 3P: Without faceplate, without strike plate
- Backset:
- 2: 31/32"
- 3: 1-1/8"
- 4: 1-1/2"
- Bolt Shape:
- 1: Straight bolt
- 5: Hook bolt
- Handing:
- 0: Non-Handed
- 5: LH or RHR
- 6: RH or LHR
Finishes:
- 313 - Dark Bronze Anodized
- 335 - Black Anodized
- 628 - Clear Anodized
Specifications for Adams Rite Manufacturing ADRMS1950P-310-628
Other SpecsAlternate Codes | MS1950P-310-628, MS1950P310628 |
Category | Glass Aluminum Hardware, Locking Hardware, Lock Sets |