ValueWave Switches 12/24VDC, 1 Gang, 1 Relay, Hand & "Wave to Exit"
Part#: CAMCM-221M/46
Hot#: 200545
Mfg: Camden Door Controls
Contact an IML Representative for Details
Notice: The info below is not item specific.
Camden Door Controls
CM-221 & CM-222 Series ValueWave switches eliminate the spread of germs through the convenience of hands-free activation, and provide industry-leading dependability and performance. Ideal for indoor or outdoor use, as part of an automatic door or access control system, ValueWave no-touch switches are designed for easy installation and trouble-free service in high traffic applications. CM-221 & CM-222 Series switches are available in a range of models with narrow, round, single, and double gang stainless steel faceplates, and a selection of faceplate graphics.
Features:
- CM-221M/46, CM-221M/46N: Includes a manual 'override' switch
- Adjustable sensor range 2" to 8" (5 to 20 cm)
- Adjustable time delay (0.5 to 20 sec.) and toggle operation
- Red/green or blue/green light ring with switch or remote activation
- Weather/water resistant, IP 65 rated
- Single, narrow and double gang stainless steel faceplates
- Selection of faceplate laser etched graphics, resistant to cleaners
- (1) Form 'C' contact, 1A @ 30 VDC
- 3 year warranty
Specifications:
- Voltage: 12 - 24 VDC ± 10% Regulated power supply required.
- Current Draw: 45 mA (PEAK)
- Response Time: 10ms
- Temp Range: 14ºF TO 122ºF (-10ºC TO +50ºC)
- Contact Rating: 1 AMP @ 30 VDC
- Contact Type: Common / N.O. / N.C.
- Dimensions: 3" L x 2.75" W x 5" H
- Weight: 0.35lbs.
Compatible Mounting Boxes:
- CM-23D: Surface box, deep - for wireless. Flame and Impact resistant black polymer (ABS) 1-3/4"W x 4-5/8"H X 1-1/2"D. Not compatible with SureWave(tm) wireless no-touch switches (including CM-331/332 with plug-in CM-TX99 module or CM-336).
- CM-34BL: Surface box, standard depth. Double wall flame/impact resistant black ABS, 2-3/4"W x 4-1/2"H x 1-3/4"D
- CM-53: Surface box, standard depth, provision for wireless. Double wall, black polymer (ABS) flame/Impact resistant, 4-1/2"W x 4-1/2"H X 2"D. For use with CM-2510 and CM-2520 vestibule switches
- CM-43CBL-ADP2: Adaptor kit to mount ValueWave double gang switch on CM-43CBL surface mount box
- CM-43LP-ADP1: Adaptor kit to mount ValueWave double gang switch on CM-43LP (low profile) surface mount box
Specifications for Camden Door Controls CAMCM-221M/46
Other SpecsAlternate Codes | CM-221M/46, CM221M46 |
Category | Access Control, Wireless |