Sargent

The 1431 series Powerglide door closer features heavy-duty construction for superior strength and wear resistance. It is ideally suited for highly trafficked environments like schools, healthcare facilities, office buildings, and commercial buildings. With a full complement of arm types and front-facing valves, this door closer can be easily installed and maintained—for interior and exterior applications.

Features:

• Exceeds 15 million cycles
• User friendly versatile mounting applications permit standard, top jamb, parallel and track installations
• Self sticking templates supplied for most applications
• Adjustable spring power allows 1431 closers a size range of 1 through 6.
• One door closer body for all applications
• High impact non-corrosive plastic covers with two machine screws standard, metal covers and lead lined are optional
• All weather fluid allows closer to operate effectively in extreme temperatures without readjustment
• 1-1/2" diameter piston for superior door control
• Standard pressure relief valves for both opening and closing cycles protect the door and frame from damage caused by abuse
• All valves are captured to prevent accidental removal
• Heavy duty one piece high silicon content aluminum alloy body provides corrosion resistance, superior strength and wear resistance
• Heat treated full rack and pinion for high strength and wear resistance
• Stringent testing supports a long-life of reliability
• Heavy duty forged steel arms are finely finished and interchangeable between Sargent 281 and 1431, and 351 Series
• All valves are captured to prevent accidental removal
• Adjustable backcheck protects the door and hardware from damage during the opening cycle
• Standard pressure relief valves for both opening and closing cycles protect the door and frame from damage caused by abuse

Specifications:

• Arm Material: Forged steel
• Body Material: Aluminum alloy
• Closer Type: Surface
• Warranty: 30-year limited warranty
• Certifications: ANSI/BHMA A156.4, Grade 1. Americans with Disabilities Act (ADA) Compliant

Standard Applications:

• 1431 Standard Application for:
• Interior doors opening in or out
• Exterior doors opening in
• 1431 Standard Application Door Opening Range:
• Range based on mounting position
• O & RO Standard Arms: 120°–180°
• H- Hold Open Arm: 90°–180°
• OLC - Low Ceiling Application Arm for Ceiling to Door Clearance of 1-1/4" – 1-1/2":
• Door top rail requirement
• 2-5/8" min. rail (116mm)
• For top rails less than 3-3/4" with window opening, the 1431-J cover plate is recommended

Arms and Accessories for Standard Applications:

• O - Standard Arm:
• Forged steel arm 11-1/4" (286mm) long
• Non-handed
• Permits 120° door opening with standard mounting
• Permits 180° door opening with alternate mounting or corner bracket
• RO Regular Arm:
• Cold formed steel arm 11-1/4 (286mm) long
• For reveal depths up to 2" (51mm)
• Arm is not handed
• Permits 180° door opening
• H - Hold Open Arm:
• Forged steel arm 11-1/4" (286mm) long
• Non-handed
• Hand is changed by inverting the foot assembly
• Friction type holder easily adjusted by a wrench
• Permits 180° door opening
• Holds open from 80° – 180°
• O8 - Mortise Foot Arm:
• Forged steel arm 11-1/4" (286mm) long
• Non-handed
• Permits 120° door opening
• Commonly used with bull nose frames
• H8 - Mortise Foot Hold Open Arm:
• Forged steel arm 11-1/4" (286mm) long
• Handed same as door
• Friction type holder easily adjusted by a wrench
• Holds open from 80° – 180°
• OLC - Standard Arm for Low Ceiling:
• Forged steel arm 11-1/4" (286mm) long
• Non-handed
• Must be used when the distance between the top of door to ceiling is less than 1-1/4" (32mm)
• Permits 120° door opening with standard mounting
• UH Package: Universal hold open arm package provides brackets and arms to install closer in top jamb, standard or parallel applications
• UO/RUO Packages: Universal arm package provides brackets and arms to install closer in standard top jamb or parallel applications
• 1431-W Corner Bracket:
• Fastens securely to both the head and jamb
• Malleable iron, painted to match closer finish
• Non-handed
• Requires 1-1/4" (32mm) minimum wide stop
• Order as 1431-W x finish
• 1431-J Cover Plate: Can be used to improve appearance when narrow door rail permits closer to be viewed through glass panel. Specify finish.

Heavy Duty Parallel Arms:

• P10 - Heavy Duty Parallel Arm:
• Forged Steel Arm 11-1/4" (286mm) long
• Non-handed
• Easily installed
• Permits 120° opening at standard mounting
• Permits 180° opening at alternate mounting
• PS - Heavy Duty Parallel Arm with Positive Stop:
• Forged Steel Arm 11-1/4" (286mm) long
• Handed arm is field-reversible
• Provides built in stop from 85° – 110°
• Permits 110° opening maximum
• Easily installed
• Permits 85° – 110° door opening
• CPS - Heavy Duty Parallel Arm with Compression Stop:
• Forged Steel Arm 11-1/4" (286mm) long
• Provides built in compression stop from 85° – 105°
• Permits 105° opening maximum
• Easily installed
• Handed arm is field-reversible
• Dead stop within 3°
• PH10 - Heavy Duty Friction Hold Open Parallel Arm:
• Equipped with adjustable friction holder
• Adjustable hold open from 75° – 180°
• Forged steel arm 11-1/4" (286mm) long
• Handed same as door
• Use friction hold open arms for doors subject to moderate hold open use
• PSH - Heavy Duty Parallel Hold Open Arm with positive Stop:
• Provides holder and stop features
• Handed arm is field-reversible
• Easily installed/adjusted
• Permits 85° – 110° door opening
• CPSH - Heavy Duty Hold Open Parallel Arm with Compression Stop:
• Forged Steel Arm 11-1/4" (286mm) long
• Handed arm is field-reversible
• Provides built in compression stop and holder mechanism from 85° – 105°
• Easily installed/adjusted
• Permits 105° opening maximum
• Dead stop within 3°
• Positive Stop Hold Open Arms (PSH & CPSH ARMS):
• Use on doors subject to repetitive hold open use
• 6 hold open angle installation
• Hold open function may be disengaged
• Hold open tension is easily adjustable

Finishes:

• EB/695 - Bronze powder coated to match finish 10B
• EN/689 - Aluminum powder coated
• ED/693 - Black powder coated to match finish 20D
• EAB/696 - Brass powder coated
• EP/691 - Bronze powder coated to match finish 10
• 03/605 - Bright brass, clear coated
• 04/606 - Satin brass, clear coated
• 09/611 - Bright bronze, clear coated
• 10/612 - Satin bronze, clear coated
• 10B/613 - Dark oxidized satin bronze, oil rubbed
• 10BE/613E - Dark oxidized satin bronze - equivalent
• 10BL/614 - Oxidized satin, bronze, clear coated
• 14/618 - Bright nickel plated, clear coated
• 15/619 - Satin nickel, clear coated
• 20D/624 - Statuary dark bronze, clear coated
• 26/625 - Bright chromium plated
• 26D/626 - Satin chromium plated
• BSP - Black suede powder coat
• WSP - White suede powder coat