
351 Series Surface Door Closer, UO Universal Arm with Parallel Mounting Bracket, ADA Cast Iron Heavy Duty Powerglide Series, Adjustable Spring Size 1-6, TB Thru-Bolts, UL Listed for Fire Rated Doors, All Weather Fluid, Grade 1, BSP Black Suede Powder Coat
Part#: SARTB-351UO-BSP**
Hot#: 206114
Mfg: Sargent

Available: 19 ( 19 DEN )
Notice: The info below is not item specific.
Sargent 351 Series
The 351 series Powerglide door closer features heavy-duty construction for superior strength and wear resistance. It is ideally suited for highly trafficked environments like schools, healthcare facilities, office buildings, and commercial buildings. With a full complement of arm types and front-facing valves, this door closer can be easily installed and maintained—for interior and exterior applications.
Features:
- Self sticking templates supplied for most applications
- Adjustable spring power allows a size range of 1 through 6.
- Non-handed
- One door closer body for all applications
- High impact non-corrosive plastic covers with two machine screws standard
- All weather fluid
- 1-1/2" diameter piston
- Standard pressure relief valves for both opening and closing cycles
- Heat treated full closed rack and pinion construction
- Heavy duty one-piece die cast aluminum silicon alloy body
- 1/2" arm engagement over a 7/16 square spindle
- Machine and self tapping screws
- Adjustable backcheck
- Captured valves
- All weather fluid allows closer to operate effectively in extreme temperatures without readjustment
- 1-1/2" diameter piston for superior door control
- Standard pressure relief valves protect the door & frame from damage caused by abuse
- All valves are controlled by an 1/8" Allen wrench to discourage tampering and are captivated to prevent removing valves from the body and damaging door closer
- Heat treated full closed rack and pinion provide control from the full open position
- Heavy duty one piece die cast aluminum silicon alloy body with 14% silicon provides superior strength and wear resistance
- Heavy duty forged steel arms are finely finished and interchangeable between Sargent 351, 1431 and 281 series
Specifications:
- Arm Material: Forged steel
- Body Material: Die cast aluminum
- Closer Type: Surface
- Minimum Hold Open Degree: 120°
- Maximum Hold Open Degree: 180°
- Warranty: 30-year limited warranty
- Certifications: ANSI/BHMA A156.4, Grade 1
Arms and Accessories for Standard Applications:
- O - Standard Arm:
- Forged steel main arm
- Non-handed
- Permits 120° door opening with standard mounting
- Permits 180° door opening with alternate mounting or corner bracket
- Can be used with the 351L retrofit plate when replacing a LCN 4040 closer
- H - Hold Open Arm:
- Forged steel main arm
- Non-handed
- Hand is changed by inverting the foot assembly
- Friction type holder easily adjusted by a wrench
- Permits 180° door opening
- Holds open from 80° – 180°
- O8 - Mortise Foot Arm:
- Forged steel main arm
- Non-handed
- Permits 120° door opening
- Commonly used with bull nose frames
- H8 - Mortise Foot Hold Open Arm:
- Forged steel main arm
- Handed same as door
- Friction type holder easily adjusted by a wrench
- Holds open from 80° – 180°
- OLC - Standard Arm for Low Ceiling:
- Forged steel main arm
- Non-handed
- 1-1/4" between the top of door to ceiling is required for OLC Arm
- Permits 120° door opening with standard mounting
- UH Package:
- Universal hold open arm package provides brackets and arms to install closer in top jamb, standard or parallel applications
- Order closer as 351-UH x finish
- 351-UH not available with (MC) metal cover or plated finishes
- UO Package:
- Universal arm package provides brackets and arms to install closer in standard top jamb or parallel applications
- Order closer as 351-UO x finish
- 351-UO not available with (MC) metal cover or plated finishes
- 351-A Mounting Plate: Allows the mounting of a 351 closer onto a door with a minimum top rail of 2-3/8". Order as: 351-A x finish
- 351- LCN Retrofit Plate: Allows an LCN 4040 closer body to be replaced with a Sargent 351 with an O arm without drilling new holes in door (Note: New holes required for arm bracket only). Order as: 351L x finish
Finishes:
- EB/695 - Bronze powder coated to match finish 10B
- EN/689 - Aluminum powder coated
- ED/693 - Black powder coated to match finish 20D
- EAB/696 - Brass powder coated
- EP/691 - Bronze powder coated to match finish 10
- 03/605 - Bright brass, clear coated
- 04/606 - Satin brass, clear coated
- 09/611 - Bright bronze, clear coated
- 10/612 - Satin bronze, clear coated
- 10B/613 - Dark oxidized satin bronze, oil rubbed
- 10BE/613E - Dark oxidized satin bronze - equivalent
- 10BL/614 - Oxidized satin, bronze, clear coated
- 14/618 - Bright nickel plated, clear coated
- 15/619 - Satin nickel, clear coated
- 20D/624 - Statuary dark bronze, clear coated
- 26/625 - Bright chromium plated
- 26D/626 - Satin chromium plated
- BSP - Black suede powder coat
- WSP - White suede powder coat
Specifications for Sargent SARTB-351UO-BSP**
Other SpecsAlternate Codes | 351UO-BSP TB, 351UOBSPTB, SAR351UO-BSP TB, SARTB-351UO-BSP, TB-351UO-BSP**, TB351UOBSP** |
Arm Type | Universal Arm |
Category | Door Closers, Surface Mount Closers, Surface Mount Door Closers |
Door Application | Surface Mount Closers |
Finish Code | BSP |
Finish Color | Black Suede Powder Coat |
Part Type | Thru Bolt |
Series | 351 |