
Fire Rated, Mechanical Rim Exit Device, Request to Exit (REX), 36in, 626/US26D Satin Chrome
Part#: CMAPD26F-RIM-36-626-REX
Hot#: 219972
Mfg: Command Access
Please Contact your IML Representative for Details
Notice: The info below is not item specific.
Command Access
The PD25-M series is a motorized latch pullback grade 1 architectural exit device; made for use in all institutions and commercial buildings when heavy duty, fire and life safety operation is required. All PD25-M models are equipped with our patent pending push to set (PTS) technology. We know that door conditions change and in retrofit scenarios you never know exactly what you’re walking into. But with our PTS adjustment your post installation adjustment is greatly simplified in 5 quick seconds. Install this device with the confidence of knowing that the PD25-M meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle “ warranty, meaning we will support you.
Features:
- MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
- “PTS”: 5 second electronic adjustment for easy post installation adjustment
- Electric dogging rated for continuous duty - auto re-engage if push pad is pulled from dogged position
- Low current draw - field switchable to “high torque” mode
- Up to 300’ wire run with 2-18ga wire - long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
- 8’ cable with quick connect for MM5 module to easily connect to power supply lead
- Optional request-to-exit can be added
- 3-year “no hassle” warranty
- “PTS” Push to set technology
- Easy installation - fast, quiet, smooth
- Retrofits Von Duprin 98/99 series exit devices
- True electronic dogging - full push pad retraction
- ANSI/BHMA A156.3 grade 1 heavy duty exit device
- UL Listed for panic & ULC10C, UBC 7-2-1997 codes
Models:
- PD25-M-RIM: Motorized latch retraction (EU)
- PD25-M-SVR: Motorized latch retraction (EU)
- PD25F-M-RIM: Motorized latch retraction (EU) - fire rated
- PD25F-M-SVR: Motorized latch retraction (EU) - fire rated
- PD26-RIM: Mechanical RIM device
- PD26-SVR: Mechanical SVR device
- PD26F-RIM: Mechanical RIM device - fire rated
- PD26F-SVR: Mechanical SVR device - fire rated
Specifications:
- Voltage range: – 24VDC +/- 10%
- System Protection: Unit shutdown when voltage exceeds 28VDC
- Standard: Average current peak: 900A, average current hold: 215mA
- High Torque: Average current peak: 2A, average current hold: 250mA
- PTS Adjustment: Approx. 1/4”
- Weight: 14 Lbs
- Materials: Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad. End caps are made of brass, bronze or stainless steel; rail travels in direction of the door swing.
- Door Widths: dimensioned for 36” - 3.75” and 48” doors
- Door Height: All devices are UL listed for panic and ULC10C, UBC 7-2-1997 codes. Single door: 48” x 96”. Double door: 96” x 96”
- Hurricane Approved for Exit Device hardware: Florida building code FL 13922
- Stile Width: 2-3/4” backset with center hub; minimum 4-1/2” stile required; optional 2-1/4” available.
- Dogging: Electronic dogging only -- no mechanical dogging available with electrified hardware.
- Fasteners: all provided, thru-bolts included with all trim for extra security
- Cylinders: not provided. Install rim cylinder by others.
- Options: Mullions, strikes, less bottom rod, latch guards and pulls
Finishes:
- 626 - Satin chrome
- 613 - Oil rubbed bronze
Specifications for Command Access CMAPD26F-RIM-36-626-REX
Other SpecsAlternate Codes | PD26F-RIM-36-626-REX, PD26FRIM36626REX |
Category | Panic Devices, Panic Devices & Exit Alarms, Rim Panic Devices |