Schlage Electronic Security

The ANT400-REM optional remote antennas are designed for use with the AD-400 series devices. They increase installation flexibility of wireless products, extend the range of wireless communication in certain directions and expand the range of applications of AD series solution. A remote antenna is used to improve signal communication strength for wireless communications through an obstruction. A typical application would be when a remote device down a hallway requires a few extra feet of signal strength to reach the PIM400, which is sometimes located around a corner or behind a wire mesh or thick brick construction material. When increased wireless communication range is required, the ANT400-REM-I/O+6dB model can up to double the range in the line of sight that it is aimed. This “gain antenna” increases the signal strength by focusing the energy in a single direction instead of broadcasting in all directions. AD Series remote antennas are important components to environments with limited installation flexibility. The connected PIM400 can be up to 15 feet away from the remote antenna via the included coaxial cable. The outdoor rated antennas create new applications that allow a PIM400 to communicate to external remote access points such as gates or remote buildings without the need to trench cables.

Features:

• Use with PIM400 and WRI400
• Increase installation flexibility
• Optimize installation location
• Extend communication range with high-gain antenna
• Directional, bi-directional or omni-directional
• Indoor and outdoor options
• Included in: ECK400 Wireless elevator kit
• Included in: GCK400 Wireless gate control kit

Remote Antenna Models:

• ANT400-REM-I/O:
• Type: Quasi omni-directional, unity gain
• Communication range extension: 15 ft due to cable length
• Location: Indoor/outdoor
• Dimensions: 9.1" x 8.4" x 1.2" (HxWxD)
• Weight: 0.5 kg
• Temperature range: -40°C to +65°C (-40°F to +150°F)
• Intended use: an omni-directional flat-panel antenna for use with indoor or outdoor applications. To be mounted vertically on a wall or post.
• Included: antenna, 15 ft coax cable, coax whip, articulated wall/post mounting bracket.
• Requires grounding kit (MGB+MCA5) for outdoor installations.
• ANT400-REM-I/O+6dB:
• Type: Directional, high gain
• Communication Range Extension: Up to 2x the original range without antenna (single direction), plus 15 ft due to cable length. Up to 200' in typical building construction or up to 2000' clear line of sight.
• Location: Indoor/outdoor
• Dimensions: 9.1" x 8.4" x 1.2" (HxWxD)
• Weight: 0.5 kg
• Temperature Range: -40°C to +65°C (-40°F to +150°F)
• Intended use: a high gain, directional flat-panel antenna for use with indoor or outdoor applications. To be mounted vertically on a wall or post.
• Included: antenna, 15 ft coax cable, coax whip and articulated wall/post mounting bracket.
• Requires grounding kit (MGB+MCA5) for outdoor installations.
• ANT400-REM-CEILING:
• Type: Omni-directional, unity gain
• Communication Range Extension: 15 ft due to cable length. Up to 200' in typical building construction or up to 1000' clear line of sight
• Location: Indoor/outdoor
• Dimensions: 9.1" x 8.4" x 1.2" (HxWxD)
• Weight: 0.5 kg
• Temperature Range: -40°C to +65°C (-40°F to +150°F)
• Intended use: anomni-directional antenna for use with indoor applications. To be mounted horizontally on ceiling.
• Included: antenna, 15 ft coax cable, and coax whip.
• ANT400-REM-HALL:
• Type: Bi-directional, unity gain
• Communication Range Extension: 15 ft due to cable length. Up to 200' in typical building construction or up to 1000' clear line of sight.
• Location: Indoor
• Dimensions: 7.2" x 3.9" x 4.9" (HxWxD)
• Weight: 0.24 kg
• Temperature Range: -10°C to + 65°C (14° F to + 150° F)
• Intended use: an bi-directional antenna for use with indoor applications. To be mounted on wall or ceiling.
• Included: antenna, 15 ft coax cable, and coax whip