Wireless Flood/Temp Sensor, White Probe Style
Part#: 2GIGFT100-345
Hot#: 231132
Mfg: 2GIG
Please Contact your IML Representative for Details
Notice: The info below is not item specific.
2GIG
The 2GIG FT100-345 wireless floor/temp sensor is a fully supervised and tamper protected 345 MHz sensor that monitors the ambient temperature thresholds and reports if changes outside of the defined settings are detected. It also has the ability to detect and report the presence of water in the immediate sensor location. The sensor transmits in non-encrypted mode by default, and can be set to encrypted mode via an on-board switch.
Features:
- Battery-powered design runs on oneCR 2.3V lithium battery
- Five-year battery life
- 345 MHz frequency
- Default non-encrypted; encryption enabled via onboard switch
Specifications:
- Wireless Signal Range: 275 ft. (80 m) open-air with wireless control panel
- Code Outputs: Alarm; alarm restore; supervisory low battery; trouble; trouble restore
- Transmitter Frequency: 345 MHz (crystal controlled)
- Supervisory Interval: 70 minutes
- High Temperature: level 95°F
- Low Temperature: level 41°F
- Housing Material: ABS Plastic
- Dimensions: 2.4” diameter, 1.3” high
- Sensor Dimensions: 2.92” H x 0.94” W x 0.85” D (74.17mm H x 23.88mm W x 21.59mm)
- Sensor Probe Dimensions: 1.31” H x 1.34” W x 0.47” D (33.27mm H x 34.04mm W x 11.94mm)
- Sensor Probe in Probe Bracket Dimensions: 1.46” H x 1.54” W x 0.57” D (37.08mm H x 39.12mm W x 14.48mm D)
- Cord between Sensor and Probe Dimensions: 45” cord with 0.169” (114.3cm cord) (4.29mm)
- Battery (included): One CR123A lithium battery
Specifications for 2GIG 2GIGFT100-345
Other Specs| Alternate Codes | GFT100-345, GFT100345 |
| Category | Access Control, Alarms & Intercom, Burglar Alarms, Switches, Sensors & Contacts |