IML Security Supply
Dallas-Fort Worth Branch Now Open. Inventory Arriving April-June.
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
Pilfergard Exit Alarm, Surface Mount, Requires Mortise Cylinder-Standard Cam, 9V Battery Included, Metallic Bronze (MB)

Part#: ALAPG21MB
Hot#: 100954
 Finish: Metallic Bronze

Available: 25 ( 3 DEN, 6 KAN, 9 LA, 6 SLC, 1 STX )

The PG21 is designed to continually monitor the status of a door. When opened, the protected door triggers an alarm sounder (95db)


  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Alarm Lock Systems Inc


PG21 Advanced Door Alarm Series from Alarm Lock are a quick and inexpensive solution when faced with security vulnerabilities from doors being propped open in schools, restaurants, stores nursing homes and theaters. Whether door-propping occurs for quick returns from taking "smoke" breaks, to permit insider-jobs or to allow unregistered visitors or contraband to circumvent main security entry points, it remains a problem for facility managers and security officers everywhere. These surface-mount, narrow stile microprocessor controlled door alarms quickly improve security at any single or double door with a 95dB alarm, entry delay, key-removal and auto-shutdown/reset options. The PG21 has two arming modes, standard mode or "always armed" mode and it enables multiple door monitoring with built-in external reed switch, has three entry delay options as well as selectable minute-shutdown. Available in Metallic Bronze or Silver models with optional bright strobe on top that lights brightly on alarm and can be easily seen across any room for pinpointing the door at issue. Typical applications include emergency fire escape doors, nursing home stairwell doors, rear restaurant and theater doors.

Features:

  • Improve security at any door and stops security vulnerability from doors propped open, for innocent and even felonious reasons in schools, nursing homes, restaurants, stores and theaters
  • Two selectable arming modes for security Door alarms and locks -
    • Always armed mode – when key is turned counter clockwise to the disarm position, the key cannot be removed. To remove key, turn back to arm mode, thus keeping unit armed always.
    • Standard security Door alarm arming mode – when key is inserted turning counter clockwise will disarm and key can be removed. Turning key clockwise will arm and key can be removed.
  • Status Indicator – The LED will indicate RED when armed
  • Long-life 9V battery (supplied), low battery alert
  • Entry Delay Time Options: Includes 15 seconds; 1 min. 15 sec. & 3 mins 15 sec.
  • For use on standard size and narrow stile doors, sleek model design key-activated door alarm
  • Sweeping Siren over 95db alarm &/or strobe
  • Unauthorized use of door causes alarm to sound and activates LED indicator &/or optional strobe
  • Options include continuous alarm, minute shutdown with auto reset and exit/entry delay
  • Uses standard mortise cylinder (not included)
  • Self contained and dual-tamper supervised
  • Continuous Power with the addition of external power supply
  • Multiple Door Monitoring permitted with external reed switches
  • Metallic silver or duranodic finish
  • Easy installation
  • For exterior key control, optional RIM cylinder may be used
  • PG21MSS/PG21MBS Optional strobe unit – include a highly visible amber strobe that flashes when unit goes into alarm

Programmable Features:

  • Four siren sounds
  • Four alarm modes for a variety of applications
  • Optional time delays
  • Long-life battery operated – approximately 2 ½ years
  • External power supply capability
  • Built-in door bell – requires button installation
  • Cover tamper protection – unauthorized removal triggers alarm
  • Key lock tamper – cover can not be removed without key
  • Multiple door monitoring – external reed/magnet switch contacts
  • Form-C Relay – connect to fire/burglary panel or other device
  • Annunciator feature – beeps when door opens
  • Two operating modes: Always armed or On/Off
  • Strobe feature – PG21MSS models only
  • Status Indicator

Ordering Information:

  • PG21MSS Metallic Silver finish with strobe
  • PG21MBS Metallic bronze finish with strobe
  • PG21MS Metallic Silver finish
  • PG21MB Metallic bronze finish

Accessories:

  • CEM Mortise cylinder for interior arming/disarming
  • CEM Rim cylinder for exterior arming/disarming
  • Battery Life 2 ½ years standby typical; 200 alarm sequences
  • PP100 Optional, continuous power supply (6-12V)

Specifications:

  • Dimensions: 11” x 2 1/2” x 2 3/8” (22.8cm x 6.3cm x 6.8cm) (LxWxD) (Length 11” with strobe, 9” without strobe)
  • Finish: Metallic silver or metallic bronze
  • Power Requirements: 9-volt alkaline batter (supplied), may also be used with PP100 (optional) or other power supply providing 9-12Vdc at 300mA. Internal battery may be used simultaneously with external power supply
  • Sounding Device: Piezo electronic sounder sweep siren, steady or pulsing, 110dB at 10 feet
  • Relay Contact: (Form-C) rated at 24VAC/DC at 1A (non-inductive)
  • Shipping Weight: 1 lb, 10 oz

Specifications for Alarm Lock Systems Inc ALAPG21MB

Other Specs
Access TypeAlarm
Alternate Codes100954, 707331, PG21MB
CategoryExit Alarms, Panic Devices & Exit Alarms
Cylinder IncludedNo
Cylinder TypeMortise Cylinder
Finish ColorMetallic Bronze
ManufacturerNAPCO Security
Power Supply TypeBattery
SupplierAlarm Lock
Voltage9v