
Access Control Power Supply/Charger, Output 12/24VDC @ 1.75 Amp, (2) PTC Class 2 Outputs, Supervised Fire Alarm Disconnect, Input: 115VAC, BC100 Enclosure
Part#: ALXAL175UL
Hot#: 138628
Mfg: Altronix
Available: 99+ ( 18 DAL, 42 DEN, 22 KAN, 18 LA, 5 LV, 29 PHX, 15 SAC, 13 SEA, 18 SLC, 9 STX )
Notice: The info below is not item specific.
Altronix Two (2) Output Switching Power Supply/Charger
AL175UL is a two (2) output Switching Power Supply/Charger that converts a 115VAC 60Hz input into two (2) individually PTC protected 12VDC or 24VDC outputs.
Specifications
- Input:
- Input 115VAC, 60Hz, 0.6 amp.
- Access control trigger input.
- Output:
- 12VDC or 24VDC selectable outputs.
- 1.75 amp supply current.
- Two (2) Class 2 Rated power-limited outputs.
- Fail-Safe/Fail-Secure lock output (switched).
- Auxiliary power output (unswitched).
- PTC protected outputs, rated @ 2.5 amp.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- Battery Backup:
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current 0.4 amp.
- Supervision:
- AC fail supervision (form "C" contacts).
- Supervised Fire Alarm Disconnect (Latching w/reset or Non-Latching).
- Visual Indicators:
- AC input and DC output LED indicators.
- Electrical:
- Operating temperature: 0° C to 49° C ambient.
- 10.75-21.5 BTU/Hr.
- System AC input VA requirement: 69VA.
- Mechanical:
- Enclosure Dimensions (H x W x D approx.): 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).
- Product weight (approx.): 5.1 lbs. (2.31 kg).
- Shipping weight (approx.): 5.6 lbs. (2.54 kg).
Specifications for Altronix ALXAL175UL
Other SpecsAccess Type | Power Supply |
Alternate Codes | 138628, AL175UL, AQD3 |
Category | Access Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies |
Voltage/Amp Rating | 12 - 24V DC |