Cal Royal

Standard weight door receiving average frequency service (standard weight hinges) and high frequency service (heavy weight hinges). Designed to have both leaves mortised into the door and the jamb. The hinge sits flush with the surface of the door and frame.

Features:

• 4-Ball bearing hinges, heavy weight
• 2-Ball bearing hinges, standard weight

Specifications:

• ANSI Products Standards: Cal-Royal hinges complies with ANSI A156.1 (butts and hinges), A156.7 (template hinge dimensions), A156.17 (self closing hinges and pivots), A 156.18 (materials and finishes).
• Plain Bearing Standard Weight: For standard weight doors receiving low frequency service. Template hinges are furnished with all machine and wood screws.
• Ball Bearing Standard Weight: For standard weight doors receiving average frequency service. Template hinges are furnished with all machine and wood screws.
• Ball Bearing Heavy Weight: For heavy doors (such as entrance and corridors) or doors receiving high frequency service. Inner edges are beveled to conform the shape of barrel and to make close fitting joints. Heavy weight template hinges are equipped with all machine and one half screws.
• Half Surface 5 Knuckle Template: For standard weight Kalamein doors with hollow metal jambs receiving average frequency service.
• Half Mortise 5 Knuckle Template: For hollow metal doors with channel iron jambs receiving average frequency service.
• Swing Clear: For use where conditions require a completely clear opening when door is opened to 90 degree angle. Inner edges of leaves are beveled to conform to shape of barrel and to make close fitting joints. Phillips head threaded plug permits hinge to be reversed to suit application.
• Full Mortise: Both leaves are mortised. One leaf in the door and one leaf in the frame (wood door or hollow metal door with wood frame or hollow metal frame).
• Half Mortise: One leaf is mortised in the door and the other is surface applied to the frame (hollow metal door with channel iron frame).
• Full Surface: Both leaves are applied to the surface, one to the door and the other to the frame (metal core door or hollow metal door with channel iron frame).
• Half Surface: One leaf is mortised in the frame and the other is surface applied to the face of the door (wood door with wood frame or metal core door with metal hollow frame).
• Materials and Finishes: Wrought Steel: Satin finishes or highly polished and plated. All plated finishes have a clear baked finish.
• Wrought Stainless Steel: Satin finish non-ferrous, non-corrosive grade 304.
• Tips: Button: All hinges have flat button tip, except concealed ball bearing hinges which are flush.
• Non-removable Pins: Removable threaded set screw in barrel prevent pin from being removed when door is closed. Available on all hinges. Use N.R.P. for ordering.
• Special Pins: Solid brass pins, stainless steel pins and hospital tips are available on request. Decorative tips are also available on 4-1/2" x 4-1/2", 4" x 4", 3-1/2" x 3-1/2" commercial hinges and 4" x 4" and 3-1/2" x 3-1/2" residential hinges. Add BT (ball tip), ST (steeple tip) before part number for specification. Other size hinge tips also available based on factory order.

Finishes:

• 605/US3 - Polished brass
• 606/US4 - Satin brass
• 609/US5 - Antique brass
• 612/US10 - Satin bronze
• 613/US10B - Oil rubbed bronze
• 619/US15 - Satin nickel
• 625/US26 - Polished chrome
• 626/US26D - Satin chrome
• 622/US1 - Flat black coated
• 630/US32D - Stainless steel metal