12/24VDC UL POWER SUPPLY W/MOM5

Part#: ALXAL300ULM
Hot#: 138506
Mfg: Altronix


  • Overview
  • Specifications

Altronix AL300ULM Multi-Output Power Supply/Charger


AL300ULM multi-output access control power supply/charger is specifically designedfor use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs.

Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes.

Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.


SPECIFICATIONS

  • Input:
    • Input 115VAC / 60Hz, 3.5 amp.
    • Input fuse rated @ 3.5 amp/250V.
    • Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
  • Output:
    • 12VDC or 24VDC selectable outputs.
    • 2.5 amp supply current.
    • Burglar Alarm Applications:
      • 12VDC = 10VDC-13.2VDC
      • 24VDC = 20VDC-26.4VDC
    • Five (5) PTC protected outputs, rated @ 2 amp.
    • Output relay energizes when unit is triggered (form "C" contact rated 1 amp @ 28VDC).
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Backup:
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
    • Maximum charge current 0.7 amp.
  • Supervision:
    • AC fail supervision (form "C" contacts).
      • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
    • Low battery supervision (form "C" contacts).
    • Battery presence supervision (form "C" contacts).
    • Power fail supervision relay (form "C" contacts).
  • Visual Indicators:
    • AC input and DC output LED indicators (power supply board).
    • Red LEDs indicate condition of power outputs (multi-output board).
    • Power and input trigger LEDs (multi-output board).
  • Electrical:
    • Operating temperature: 0° C to 49° C ambient.
    • BTU/Hr.:
      • 12VDC: 15.35 BTU/Hr.
      • 24VDC: 30.71 BTU/Hr.
    • System AC input VA requirement: 402.5VA.
  • Mechanical:
    • Enclosure Dimensions (H x W x D approx.): 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm)
      • Accommodates up to two (2) 12VDC/7AH batteries.
    • Product weight (approx.): 7.6 lbs. (3.45 kg).
    • Shipping weight (approx.): 8.6 lbs. (3.9 kg).

Specifications for Altronix ALXAL300ULM

Specifications
Access TypePower Supply
Voltage/Amp Rating12 - 24V DC
Other Specs
Alternate Codes138506, AL300ULM, PIB1230ULM