
Power Supply/Charger, Output 12/24VDC @ 6A, Single Class 2 Output, Input: 115VAC, LED Visual Indicators, BC300 Enclosure
Part#: ALXAL600ULX
Hot#: 125069
Mfg: Altronix
Available: 99+ ( 8 DAL, 14 DEN, 31 KAN, 17 LA, 2 LV, 8 PHX, 8 SAC, 3 SEA, 9 SLC, 2 STX )
Notice: The info below is not item specific.
Altronix Power Supply/Charger
AL600ULX is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output.
Specifications
- Input:
- Input 115VAC, 60Hz, 3.5 amp.
- Output:
- 12VDC or 24VDC selectable output.
- 6 amp continuous supply current.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- Battery Backup:
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current 0.7 amp.
- Supervision:
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts).
- Visual Indicators:
- AC input and DC output LED indicators.
- Electrical:
- Operating temperature: 0° C to 49° C ambient.
- 36.85 or 73.70 BTU/Hr.
- System AC input VA requirement: 402.5VA.
- Mechanical:
- Enclosure Dimensions (H x W x D approx.): 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm)
- Accommodates up to two (2) 12VDC/7AH batteries.
- Product weight (approx.): 7.6 lbs. (3.45 kg).
- Shipping weight (approx.): 8.5 lbs. (3.86 kg).
Specifications for Altronix ALXAL600ULX
Other SpecsAccess Type | Power Supply |
Alternate Codes | 125069, AL600ULX |
Category | Access Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies |
Voltage/Amp Rating | 12 - 24V DC |