MS Sedco

The TDM is a multipurpose microprocessor based timing module that can be used for a variety of applications. Its unique design and open architecture allows the TDM to be used in any type of application that requires timing control of up to two outputs with up to four inputs. Universal time delay module provides up to 4 inputs that can be converted to sequential relay outputs. Each output is adjustable 0-99 seconds. The TDM can add additional time of 0-99 seconds, sequence electric locks and automatic doors or sequence vestibule doors all from a single device.

Features:

• Using the TDM to provide a simple time delay of 0-99 seconds.
• Using the TDM as a make/ break relay to eliminate mechanical binding of the electrical locking mechanism on an automatic door. The make relay can even be configured as a wet output to directly apply power to the electric locking device.
• Using the TDM to sequence vestibule doors. One unit is capable of sequencing the vestibule doors from both directions.
• The four inputs on the TDM allow sequencing or independent operation of the two outputs.
• Input 1 will sequence output 1 then 2.
• Input 2 will sequence output 2 then 1.
• Input 3 will operate output 1 independently.
• Input 4 will operate output 2 independently.
• Both outputs on the TDM are programmable for “on time” duration as well as the delay time between the two outputs from 0 to 99 seconds

Specifications:

• Power: 12 to 24 V AC or DC
• Power Consumption: 2W Maximum
• Output Contact: Form C, rated At 3 Amps
• Temperature: -22°F to 158°F (-30°C to 70°C)
• Color: Flat black
• Enclosure: ABS Plastic
• Weight: 0.25 lb.
• Physical Size: 4 3/4"L x 2 1/4"W x 3/4"H