Camden Door Controls

The RX-92 receiver is designed to mount inside the automatic door header. Screw holes are located at each end of the receiver case, or the included Velcro may also be used to hold it securely. The RX-92 has two relays, and three potentiometers with two 1 – 30 second adjustable Hold time (or delay-on-release) and a 1 – 15 second delay-on-activate for the second relay. The 4-position dip switch selects from one of 6 different operating modes.

Specifications:

• Dimensions: 3.25" L x 5" W x 1.75" H
• Wireless Frequency: 905.25 / 915.25 / 925.25 MHz spread spectrum
• Receiver Capacity: 40 CM-TX Series transmitters
• Codes: 1 Million Unique (20 Bit) Codes
• Power/Voltage: 12/24V AC/DC
• Contact Rating: 3A @ 30 VDC
• Status and Alarm Indicators: Relay status, signal strength, erase mode and pot position
• Temperature Range: Alkaline: 32°F to 122°F (0°C to 80°C). Lithium: -40°F to 122°F (-40°C to 50°C)
• Output: (2) SPDT relays, 6 modes
• Current Draw: 23mA - 63mA
• Time Delays: 3 potentiometers:
• Relay 1 D.O.R. = 1 – 30 sec
• Relay 2 D.O.O = 1 – 15 sec
• Relay 2 D.O.R. = 1 – 30 sec
• Weight: 0.27lbs.